MIL-DTL-5423D, DETAIL SPECIFICATION: BOOTS, DUST AND MOISTURE SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR (05 APR 2002) [SUPERSEDING MIL-B-5423C]., This specification covers the general requirements for molded silicone rubber boots whichcan be used on component parts such as toggle and pushbutton switches, circuit breakers, androtary-actuated parts such as rotary switches, variable resistors, capacitors, inductors, and transformers.The boots protect the component parts-actuating mechanism from sand, dust, water and othercontaminants, and seal the panel on which the component parts are mounted.
基本信息
标准名称: | 轮胎外胎模具 第2部分:两半模具[合订本] |
英文名称: | Mould for tyre covers-Part 2:Two pieces mould |
中标分类: |
化工 >>
化工机械与设备 >>
橡胶、塑料用机械 |
ICS分类: |
|
替代情况: | 替代HG/T 3227-1987 |
发布部门: | 工业和信息化部 |
发布日期: | 2009-02-05 |
实施日期: | 2009-07-01 |
首发日期: | |
作废日期: | |
主管部门: | 工业和信息化部 |
归口单位: | 全国橡胶塑料机械标准化技术委员会橡胶机械分委会 |
起草单位: | 广东巨轮模具股份有限公司;山东豪迈机械科技有限公司;浙江来福模具有限公司;北京橡胶工业研究设计院 |
出版社: | 化工业出版社 |
出版日期: | 2009-07-01 |
页数: | 31页 |
适用范围
本标准规定了汽车轮胎外胎活络模具的术语和定义、分类、规格与基本参数、型号编制方法、技术要求、安全要求、试验方法、检验规则及判定、标志、标牌、标签及使用说明书、包装运输和贮存等的要求。
本标准适用于轿车、轻型载重汽车、载重汽车、工程机械等子午线轮胎的外胎活络模具。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 化工 化工机械与设备 橡胶 塑料用机械
【英文标准名称】:Steelwireformechanicalsprings.Stainlessspringsteelwire
【原文标准名称】:机械弹簧钢丝.不锈钢弹簧钢丝
【标准号】:BSEN10270-3-2011
【标准状态】:现行
【国别】:英国
【发布日期】:2011-11-30
【实施或试行日期】:2011-11-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:Dimensions;Finishes;Inspection;Kind;Marking;Materials;Mechanicalproperties;Packages;Properties;Rustless;Specification(approval);Springsteels;Springwires;Springs;Steelwires;Steels;Testing;Tolerances(measurement);Wires
【摘要】:
【中国标准分类号】:H49
【国际标准分类号】:77_140_25;77_140_65
【页数】:26P;A4
【正文语种】:英语